Power volume button

Amplificador de bulbos super portable, pequeño pero poderoso, ideal para practicar o tocar a bajos volumenes en vivo!Especificaciones. Controles:Tone, Volume, OP Level (4W, 1W, 1/4W)Entradas/Salidas:Entrada, Altavoz externo (1/4/")Potencia:4 W RMS a 16-OhmAltavoz:1x10/" Celestion VX10 custom a 16-OhmVálvulas:1x12AX7 (pre) / 1xEL84 (etapa)Dimensiones:350 x 215 x 355,6 mmPeso:9kg

Extraordinario amplificador marca KRELL en estado inmaculado, JAMAS REPARADO, estética de 10, 150 watts por canal. entradas balanceadas, se puede usar también como PRE AMPLIFICADOR, si eres conocedor y/o audiofilo incurable seguramente sabrás de que estamos hablando. INCLUYE CONTROL REMOTO ORIGINAL Y CABLE DR ALIMENTACIÓN. NOTA: Solo venta local y en efectivo, mucha seriedad. ESPECIFICACIONES Solid-state, remote-controlled, stereo integrated amplifier with five line-level inputs including one tape loop. Power output: 150Wpc into 8 ohms (21.8dBW), 300Wpc into 4 ohms (21.8dBW). THD: <0.06%, midband, rising to 0.3% at 20kHz. Input impedance: 210k ohms. Input overload: 9V RMS. Maximum voltage gain: 36.1dB. Input sensitivity: 55mV unbalanced, 28mV balanced, for full power, volume control maximum. Output impedance: 0.16 ohms. Power consumption at idle/standby: 50W. Dimensions: 19" W by 15.5" D by 3.7" H. Price: $2350. Approximate number of dealers: 45. Warranty: five years, transferable.

Power: 20W (hybrid) Tube: one 12AX7 tube preamp with solid state power amp Controls: Volume, tone and Gain Headphone output & Aux input for MP3

10” Dual 4? Subwoofer/Dynamic Power Handling: 1000 Watts High temperature voice coil wire around avented KSV former Precise motor ventilation design Large gauge push button speaker terminals Injection Polypropylene cone with Acu-linear foam surround Linear Roll progressive dampener Stealth mounting gasket for custommounting applications Proprietary protective magnet band Anti- Resonance heavy gauge solid steelframe Optimized magnetic drive motor RMS Power Handling Watts 350W Dynamic Power Handling Watts 1000W Power Range RMS Watts 250W - 350W Woofer Diameter (mm) 257mm Woofer Diameter (in) 10.12” Woofer Mounting Depth (mm) 139mm Woofer Mounting Depth (in) 5.47” Overall Height (mm) 159mm Overall Height (in) 6.26” Cut Out Diameter (mm) 231.5mm Cut Out Diameter (in) 9.11”  Recommended Enclosure: EW5 10D4 Sealed Volume 1.15 Cu Ft. Vented Volume:1.31 Cu Ft

Bang & Olufsen CONECTIVIDAD Collapse Versión de Bluetooth 4.2 Entradas y salidas USB-C para carga, reproducción en streaming y altavoz Controles en el dispositivo Power Bluetooth Connect Button Shake Control Micrófono Yes (1 Microphone) Integración del asistente de voz Source device Voice Assistant via push button to talk P2 Altavoz Bluetooth Personal y portátil Producto Usado, estética 9.8/10 sin caja y se entrega con cable de carga genérico. NÍTIDA CALIDAD DE LAS LLAMADAS Micrófono integrado Tanto si está en la oficina como en su casa, el micrófono integrado y el potente altavoz hacen que Beoplay P2 sea ideal para hacer y recibir llamadas con la función manos libres de su teléfono u ordenador. ¿Quiere pedirle algo a Siri o al Asistente de Google? Disfrute de la activación por voz total con un solo toque. BATERÍA Collapse Autonomía de la batería Hasta 10 horas Consumo eléctrico Típico: 8 W Standby: 0,5 W Fuente de alimentación 5 V DC/3 A mediante conector USB-C Tiempo de carga 2 horas a 5 V - 2 A/3 A de carga Indicador de autonomía de la batería Visible en la app Bang & Olufsen y en LED de batería SONIDO Más potente de lo que parece Diga adiós a los altavoces de baja calidad de su smartphone. Calibrado por los expertos ingenieros de Bang & Olufsen, Beoplay P2 está listo para mejorar su experiencia acústica con un sonido sorprendentemente rico en matices con un tamaño muy reducido. CONECTIVIDAD Collapse Versión de Bluetooth 4.2 Entradas y salidas USB-C para carga, reproducción en streaming y altavoz Controles en el dispositivo Power Bluetooth Connect Button Shake Control Micrófono Yes (1 Microphone) Integración del asistente de voz Source device Voice Assistant via push button to talk

Suena bastante fuerte y todo le sirve. Polvoso y unos rasguños en los lados cómo se aprecia en la imágenes Power: * 10 watts Speakers: * One Epiphone 8" speaker Inputs: * 1/4" input jack * 1/4" Headphone output Controls: * On/off switch & light * Boost button * 3-band EQ (trebel/middle/bass) * 1 Volume control Chassis: * Black tolex covering * Black grille cloth * Rubber top-mounted carrying handle * Black faceplate * Plastic Epiphone emblem in bottom left corner * Open back design

Amplificador Suhr Badger 18 impecable en mint condition. 18 watts con dos bulbos de poder El84, suficiente poder para ensayar, tocar en vivo microfoneado y para tocar en casa a volúmen muy bajo con el Power Scaling que funciona bastante bien. Puedes conseguir un sonido con overdirve tipo Plexi y también con el gain abajo te da unas limpias muy bonitas y cristalinas tipo Vox. Lo mejor de dos sonidos clásicos!! Tiene bastante gain para tocar blues y rock, Además es una excelente plataforma para pedales. Cuenta con effects loop para conectar tus efectos de rack o pedales. Es un ampli muy dinámico y responsivo a tu estilo y ataque. The Suhr Badger is a single channel amp that dynamically interacts with your guitars volume control and responds to your playing style. The cathode biased power section lends itself to dynamic, spongey tones and requires no bias adjustment when replacing power tubes. POWER: Power Scaling emulates the tonal response of a high wattage amp on 10, at manageable volumes. Power controls the voltage that feeds the output section and in turn, the wattage. As you lower the voltage of the power section you are reducing the amount of signal it can handle before clipping the output section. To compensate for this we use the Drive control so you can easily scale down to 1 watt without losing tone & feel. DRIVE: Feeds the input to the power section. With Power at 10 it acts as a master volume. As a rule of thumb, when you turn down the Power always set the Drive control within 2 numbers of the Power setting. If you set the drive lower than the power it will sound brighter, like a master volume amp. GAIN: Controls the amount of preamp gain by controlling 2 cascading gain stages simultaneously to drive the input stage. TONE CONTROLS: Bass, Middle and Treble tone controls for each channel are post-gain and passive cut-style. We recommend starting around 5 and dialing to taste

Funciona perfecto, le cambie los bulbos a unos electro harmonix recientemente. Lo puedes calar cerca del tec, y tambien se hacen entregas. VOX AC15C1-V-RD CUSTOM SPECIFICATIONS OUTPUT POWER: 15 Watts RMS into 16 Ohms TUBE COMPLEMENT: Preamp: ECC83 / 12AX7 (x3) Power amp: EL84 (x2) AC15C1-V-RD SPEAKERS: 12 Celestion G12 V-Type(x1); 16 Ohm Inputs: NORMAL Channel; TOP BOOST Channel FOOT SWITCH Jack CONTROLS: NORMAL Channel: Volume TOP BOOST Channel: Volume, Treble, Bass REVERB: Level TREMOLO: Speed, Depth MASTER: Tone Cut, Volume Outputs: Extension Speaker Jack, External Speaker Jack DIMENSIONS (W X D X H): 602 x 265 x 456 mm / 23.70 x 10.43 x 17.95 inches

***Su compra está protegida hasta que reciba el producto***. Envío exclusivamente por Segunda Mano Express a través de DHL/Fedex/UPS. ***No hay entregas personales ni tratos por fuera de Segunda Mano*** SUBWOOFER KICKER CVR COMPVR12 12 PULGADAS 4 OHMS 800 WATTS Haga zoom sobre fotos para detalles Funciona correctamente, no está desconado o reparado, se muestra tal cual en las fotos. Recibe única y exactamente lo que ve en las fotos. Se envía empacado apropiadamente para que no sufra daños en el transcurso del envío. OTRAS ESPECIFICACIONES TÉCNICAS: *mica-filled polymineral cone *Santoprene rubber surround *dual 2-ohm voice coils *frequency response 25-500 Hz *power range 50-400 watts RMS (200 watts RMS per coil) *peak power handling 800 watts *sensitivity 86.5 dB SPL *top-mount depth 5-13/16" *sealed box volume 1.0-4.6 cubic feet *ported box volume 1.75-2.25 cubic feet

Subwoofer en perfecto estado y funcionamiento, excelente estética, no se le excedió bobinas intactas, muy poco usó 10" subwoofer with dual 4-ohm voice coils polypropylene cone with hi-roll rubber surround cast aluminum frame power range: 50-350 RMS watts (175 watts per coil) peak power handling: 1,400 watts frequency response: 25-400 Hz sensitivity: 91 dB mounting depth: 5-7/8" sealed box volume: 0.75 cu. ft. ported box volume: 1.25 cu. ft.

en excelentes condiciones y estado, excelente estética,nunca se le excedió, sé usó muy poco, funcionando al 100 % 15" subwoofer with dual 4-ohm voice coils polypropylene cone with hi-roll rubber surround power range: 50-300 RMS watts (150 watts per coil) peak power: 1,200 watts frequency response: 23-400 Hz sensitivity: 93 dB mounting depth: 5-9/16" sealed box volume: 1.50 cu. ft. ported box volume: 3.50 cu. ft.

Pequeño En El Oído Amplificador De Sonido Invisible. * Este producto viene desde China DESCRIPCIÓN Este producto puede brindarle una experiencia auditiva perfecta. Te ayudar a escuchar el mundo ms claramente.Caracteristicas:Porttil para viajes al aire libre y algunas situaciones requieren amplificacin de sonido.Bajo consumo de energa y de larga duracin.Proporcione la mejor ayuda para usted con reduccin automtica de ruido sper sensibilidad y microcondensador.Gradualmente ajuste a un nivel apropiado evite la prdida de audicin.Cmodo y fcil de usar.Especificaciones:Marca: AXON! Tipo de artculo: Asistencia auditiva! Material: ABSVolumen: Hasta 40 db! Batera: 3 * 1.5 V AG13 Batera de botn! Peso del paquete: 90g / 3.17ozTamao del paquete: 10 * 8 * 3.5cm / 3.93 * 3.14 * 1.37inLista de paquetes:1 * Asistencia auditiva! 1 * Pequeo Ear Cap1 * Tapa auditiva grande3 * Bateras 1 * Manual1 * Assistenza per l#39;ascolto1 * Cappuccio per orecchie piccolo1 * Cuffia acustica grande3 * Batterie1 * manuale ESPECIFICACIONES Brand: AXON Item type: Listening Assistance Material: ABS Volume: Up to 40 db Battery: 3 * 1.5 V AG13 Button Battery Package weight: 64g / 2.25oz Package size: 10 * 8 * 3.5cm / 3.93 * 3.14 * 1.37in

Vendo Amplificador Fender Frontman 212R con Foot Switch y cable de alimentación. Impecable. Excelentes condiciones. ULTIMO PRECIO. NO DEPÓSITOS, TRANSFERENCIAS. PAGO EN EFECTIVO A LA ENTREGA. Funciones y detalles 100 Watts into 4 ohms 2-12" Special Design 8 ohm, 50 watt Speakers Three Selectable Channels (Normal, Drive and More Drive) Controls: Normal Channel: Volume, Treble, Bass. Drive Channel: Drive, Volume, Channel Select Switch, Treble, Mid, Mid Contour Switch, Bass, Reverb. Additional Features: Dedicated Volume and Tone Controls in Both Channels, Effects Loop, Footswitch Jack (For Remote Drive Select with Optional Footswitch), IEC Grounding Type Power Supply Cord

4g Tarjeta De Apoyo Inalámbrico Wifi Router Con 4g Antena. * Este producto viene desde China DESCRIPCIÓN Features: 1. All metal structure, stable performance, small size. Easy to install and embed, resistant to environmental resistance. Widely used in the industrial field. 2. With wired broadband interface. Dual channels function with 4G dialing and WAN port dialing. 3. External 4 independent 4G/3G+WiFi antenna interfaces provide optimal coverage and reliability, and improve signal strength. Allows you to enjoy reliable wireless connection anytime, anywhere. 4. 4G wireless router, integrated with WiFi hotspot, can support up to 30 WiFi users to connect simultaneously via WiFi. 5. Excellent quality and durability. Specifications: Size: Approx. 14.2*9.5*3cm/5.59*3.74*1.18inch Chip solution CPU: QCA9531     Standard IEEE802.3u MDI / MDIX 10/100 Fast Ethernet IEEE802.11a/b/g/n wireless LAN interface IEEE 802.11n wireless LAN standard DDR 64/128Mbyte Flash memory 8/16Mbyte Power 12V/1A CPU frequency 650MHz 4LAN PORT 4LAN  10M/100Mbps 1WAN PORT 1WAN 10/100/Mbps 4G Support 7 modes 4G Internet access 2.4G antenna 2.4G 5dbi two 4G&GPS antenna 4G high gain antenna and GPS antenna Reset button Reset the device to factory settings Power requirement 12V/1A support: 24VDC 1A Transmission rate 802.11a/b/g/n/:300M,54M, 48M, 36M, 24M, 18M, 12M, 9M, 6Mbps HT20:7.2M,14.4M,21.7M,28.9M,43.3M,57.8M,65M,72.2M,14.4M,28.9M,43.3M,57.8M,86.7M,115.6M,130M,144.4M HT40:15M,30M,45M,60M,90M,120M,135M,150M,30M,60M,90M,120M,180M,240M,270M,300M Transfer method Direct Sequence Spread Spectrum (DSSS) Modulation OFDM/BPSK/QPSK/CCK/DQPSK/DBPSK RF frequency range China: 2.412 GHz ~ 2472 GHz (13 channels) Package List: 1 * Router 1 * Adapter 2 * Antenna 2 * Suction cup antenna ESPECIFICACIONES

Estabilizador Zhiyun Liso 4 Handheld Gimbal Para Cáma. Integrated control panel design Reduces the need to touch the screen and helps users directly control the stabilizer and moving camera using hotkey buttons. Focus stretch and zoom With professional and sophisticated handwheels, you can zoom in or out because you want to take close-up shots; by pressing the FN switch button, the handwheel can be configured as a focus puller to help you achieve high speed in real time The focus of the precision changes. PhoneGo mode for instant scene transition Instantly release the potential of the motor to respond to every subtle movement without delay. Time Lapse Expert It can realize the functions of Timelapse, moving time lapse and Motionlapse, recording the art of life and display time. Object tracking You can build the objects you want to track on the screen, and the stabilizer can do the rest. Two-way charging with longer run time Smooth 4 for 12 hours of continuous operation. It uses the mainstream Type-C charging port, the smooth 4 can be charged by a portable power source, and the phone can be charged via the stabilizer via a USB port on the tilting axis. Always powerful and compatible with all mobile phones The motor power of Smooth 4 has been greatly enhanced to make it compatible with all sizes of mobile phones. Unique editing design The unique clip-on design allows for easy transition between standby mode and start mode by folding and extending the horizontal arm of the universal joint. This is a perfect shooting and video companion when traveling. Lightweight and durable Smooth 4 is made of high-quality composite and ergonomically designed to be both hard and light. Hammer paint texture adds a unique sheen and a smarter feel. The classic ergonomic design makes it easy to wear and comfortable to hold. Operation Voltage Standard 7.4V Output Voltage Standard 5V Operation Temperature Max 45 Celsius Standard 25 Celsius Min -10 Celsius Battery Runtime Standard 12 h Laboratory data Charging Time Standard 3 h Stabilizer Tilt Mechanical Range Standard 240 Roll Mechanical Range Standard 240